Path: news1.icaen!news.uiowa.edu!chi-news.cic.net!feed1.news.erols.com!howland.erols.net!newsfeed.internetmci.com!in1.uu.net!li.net!bookworm!mwade From: Mark Wade Newsgroups: comp.sys.apple2 Subject: Re: NEEDED: pinouts for Numeric keypad IIe: db-15 tp m-board Date: Sat, 9 Nov 1996 22:36:44 -0500 Organization: LI Net (Long Island Network) Lines: 82 Message-ID: References: <55ghkk$28q@lynx.unm.edu> NNTP-Posting-Host: bookworm.suffolk.lib.ny.us Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: mwade@bookworm To: stephen e buggie In-Reply-To: <55ghkk$28q@lynx.unm.edu> On 2 Nov 1996, stephen e buggie wrote: > Date: 2 Nov 1996 22:23:16 GMT > From: stephen e buggie > Newsgroups: comp.sys.apple2 > Subject: NEEDED: pinouts for Numeric keypad IIe: db-15 tp m-board > > > I just got a very clean external keypad: > > Numeric Keypad IIe, Apple brand. > > > It has a db-15 male plug for the back-panel. Apparently, I must > construct an > internal cable: db-15 back-panel female to motherboard Molex-11 female. > > > > QUESTIONS: > > Anyone have this internal cable ---- that I could buy? > > or > > Anyone have the pin-to-pin mapping that would allow me to construct > a suitable internal cable from scratch? > > > > Is it possible to adapt the plug to work through the mouse/joystick > port on the IIC? (A keypad would be very handy to have on the IIC ---- > I have five twoc's. > > > Thanks. Steve Buggie buggie@unm.edu > Re: pinouts for numeric keypad //e You need a female DB-15 to 11 pin female header. If the female DB-15 is numbered like this: __________________________________________ \ / \ 8 7 6 5 4 3 2 1 / \ 15 14 13 12 11 10 9 / \__________________________________/ And the 11 pin header is numbered like this: _______________________________________ | | | 11 10 9 8 7 6 5 4 3 2 1 | |_____________________________________| Then: DB-15 | Header __________|_____________ 12 11 11 10 10 9 9 8 NC 7 7 6 6 5 5 4 3 3 2 2 1 1 I don't think it can be adapted to the //c but I'm not certain. Perhaps if you opened one of your //c's and looked for a connector on the mother board but I really doubt you can use one of the ports. Mark Wade mwade@suffolk.lib.ny.us m.wade7@genie.com mswade@delphi.com Path: news1.icaen!news.uiowa.edu!news.physics.uiowa.edu!nntp.ksu.edu!news.mid.net!mr.net!www.nntp.primenet.com!nntp.primenet.com!feed1.news.erols.com!howland.erols.net!news.mathworks.com!uunet!in1.uu.net!li.net!bookworm!mwade From: Mark Wade Newsgroups: comp.sys.apple2 Subject: Re: NEEDED: pinouts for Numeric keypad IIe: db-15 tp m-board Date: Mon, 11 Nov 1996 11:59:00 -0500 Organization: LI Net (Long Island Network) Lines: 53 Message-ID: References: <55ghkk$28q@lynx.unm.edu> Reply-To: Mark Wade NNTP-Posting-Host: bookworm.suffolk.lib.ny.us Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Sender: mwade@bookworm In-Reply-To: On Sat, 9 Nov 1996, Mark Wade wrote: > > Re: pinouts for numeric keypad //e > > You need a female DB-15 to 11 pin female header. If the female DB-15 > is numbered like this: > __________________________________________ > \ / > \ 8 7 6 5 4 3 2 1 / > \ 15 14 13 12 11 10 9 / > \__________________________________/ > > And the 11 pin header is numbered like this: > > _______________________________________ > | | > | 11 10 9 8 7 6 5 4 3 2 1 | > |_____________________________________| NUMERIC KEYPAD > Then: > > DB-15 | Header > __________|_____________ > > 12 11 > 11 10 > 10 9 > 9 8 > NC 7 > 7 6 > 6 5 > 5 4 > 3 3 > 2 2 > 1 1 > On that pin out I posted, the above is as viewed on the motherboard, not a female connector to attach to the male connector on the motherboard. The DB-15 was, however, the female connector that you would plug the keypad into. Sorry for any confusion.> Mark Wade mwade@suffolk.lib.ny.us m.wade7@genie.com mswade@delphi.com