Path: news.uiowa.edu!hobbes.physics.uiowa.edu!newsrelay.iastate.edu!vixen.cso.uiuc.edu!uwm.edu!uwvax!fullfeed!bpvh
From: bpvh@shell1.msn.fullfeed.com (Bradley VonHaden)
Newsgroups: comp.sys.apple2
Subject: RE: Grappler + Questions
Date: 17 May 1995 23:03:24 GMT
Organization: FullFeed Communications (Internet +1.608.246.2701 info)
Lines: 35
Message-ID: <3pdvbs$ss9@fullfeed.msn.fullfeed.com>
NNTP-Posting-Host: shell1.msn.fullfeed.com


cplater@pass.wayne.edu (Chuck Plater) wrote:

>Does anyone have or know where I could find the dip switch
>settings for the Grappler + card?

This is from my archives.  It seems to have been posted originally by Mitchell
Spector [spector@vax2.concordia.ca]:

G+ Pin assignments:     DIP switch settings:
~~~~~~~~~~~~~~~~~~      ~~~~~~~~~~~~~~~~~~~
STB   1                 DIP SWITCH POSITIONS              1    2    3    4
D0    3
D1    5                 Epson Series and Star Gemini      OFF  ON   ON   ON
D2    7                 NEC 8023/C, Itoh 8510/DMP 85      OFF  ON   ON   OFF
D3    9                 Centronics 739-1                  OFF  ON   OFF  ON
D4    11                Anadex Printers                   OFF  ON   OFF  OFF
D5    13                Okidata 82A, 83A, 92, 93, 84      OFF  OFF  ON   ON
D6    15                Okidata 84 w/o Step II Graphics   OFF  OFF  OFF  ON
D7    17                Apple Dot Matrix                  OFF  OFF  ON   OFF
ACK   19                IDS Printers                      (Any position)
BUSY  21
P.E.  23                Notes: "+" side, or set to right, the switch is set to
SLCT  25                the ON position. Switch 1 controls MSB, the 8th bit.
N/C   -                 Setting switch 1 to 'ON' makes MSB _not_ transmitted...
GND   all others

>so I told AW (5) to add LF's after CR's, and removed the printer
>setup string.

I use 'Control-I 0N' as my printer init string.

****bpvh   Internet: bpvh@msn.fullfeed.com    GEnie: B.VONHADEN****
****Posted by an Apple IIgs using my own Proterm 3.1 File Macro****