Description: Apple II Workstation Card: Magic Slate Printing Issue (11/96)
Header: Apple II Workstation Card: Magic Slate Printing Issue (11/96)

 Article Created: 14 May 1991
 Article Reviewed/Updated: 18 November 1996

 TOPIC -----------------------------------------------------------

 When attempting to print from Magic Slate v2.0 using an Apple IIe and a
 Workstaton Card connected to an ImageWriter II , using AppleTalk, we get the
 message "includeProcSet IWEm 1 1" on the printout. Is there a fix for this
 problem?

 DISCUSSION -------------------------------------------------------

 Magic Slate thinks it is talking to a LaserWriter instead of an ImageWriter
 II. Because the Apple II Workstation card emulates a Super Serial Card, you
 should select that interface in the Magic Slate program.

 Also, on an Apple IIe, you always have to run Chooser.II before you run an
 application and without powering off the computer, see below.

 1)  Launch your Apple II workstation disk.

 2)  Choose your printer.

 3)  Quit Chooser.II, but DO NOT power off.

 4)  Launch Magic Slate by ProDOS pathname.  For example, -
 /volumename/application name.

 5)  Configure Magic Slate to print to an ImageWriter at the slot that
 contains the workstation card.

 If this doesn't work, perhaps Magic Slate is not flexible in the slot
 location or is clearing the Chooser.II info on launch.


 Article Change History:
 18 Nov 1996 - Reviewed for technical accuracy, revised formatting.
 Copyright 1991-96, Apple Computer, Inc.
 Keywords: