Path: senator-bedfellow.mit.edu!dreaderd!not-for-mail Message-ID: Supersedes: Expires: 27 May 2000 21:48:47 GMT References: X-Last-Updated: 2000/04/13 Organization: none From: rubywand@swbell.net Newsgroups: comp.sys.apple2,comp.answers,news.answers Subject: Apple II comp.sys.apple2 FAQs, Part 6/23 Followup-To: poster Approved: news-answers-request@MIT.EDU Summary: Comp.sys.apple2 (Csa2) is concerned with the Apple II series of computers. It is the net's largest forum for users to ask questions, discuss issues, and share ideas. The complete set of Csa2 text FAQs and Resource files is maintained on the U. Iowa Ground site and mirrors. The Csa2 html FAQs are maintained on the II Computing site. Originator: faqserv@penguin-lust.MIT.EDU Date: 13 Apr 2000 21:56:57 GMT Lines: 1089 NNTP-Posting-Host: penguin-lust.mit.edu X-Trace: dreaderd 955663017 21252 18.181.0.29 Xref: senator-bedfellow.mit.edu comp.sys.apple2:158181 comp.answers:40436 news.answers:181464 Archive-name: apple2/faq/part6 Posting-Frequency: monthly Last-modified: 2000/4/1 URL: http://home.swbell.net/rubywand/A2FAQs1START.html The comp.sys.apple2 Usenet newsgroup Apple II FAQs originate from the Ground Apple II archive, 1997-2000. Administrator: Steve Nelson Csa2 FAQs-on-Ground ref: Csa2DOSMM.txt rev025 1 April 2000 DOS & ProDOS 001- What is a "DOS"? 002- What DOS's are available on Apple II computers? 003- Are there any faster better versions of DOS 3.3? 004- What commands are available in DOS 3.3? 005- How do I use DOS commands from the keyboard? a program? 006- How do I use variables in a DOS command? 007- How do I create new DOS 3.3 diskettes? 008- How much storage space is on a 5.25" diskette? 009- Can I format a DOS 3.3 diskette for just data storage? 010- What is the "Volume Table of Contents" or "VTOC"? 011- Can I assign names to my DOS 3.3 diskettes? 012- What does it mean to "Boot" a disk? 013- What file types does DOS 3.3 have 014- What do the entries in a DOS 3.3 Catalog display mean? 015- Re. DOS 3.3 file names: How long? What characters are legal? 016- How can I use DOS 3.3 to read/write sectors from machine code? 017- How many 'official' versions of DOS 3.3 are there? 018- How can I find out the address and size of a BLOADed file? 019- What information is included in the VTOC and Catalog sectors? 020- How does DOS 3.3 remember which sectors are used? 021- What are the formats of DOS 3.3's main file types? 022- How can I run DOS 3.3 programs from 3.5" disks and hard disk? 023- How can I get DOS 3.3 from the net without an A2 tcom utility? 024- What is ProDOS? 025- What are ProDOS's major features? 026- Which Apple II's can run which versions of ProDOS? 027- How can I create bootable ProDOS diskettes? 028- How do I make a ProDOS disk that will start BASIC? 029- What is the maximum size of a ProDOS volume? 030- How do I LOAD, SAVE, etc. files under ProDOS? 031- What is a "pathname"? 032- What is the default volume and folder when ProDOS boots? 033- How can I set default volume and folder under ProDOS? 034- How can I discover the name of the current default volume? 035- How do I create a folder? 036- How can I access ProDOS routines from machine language? 037- How can I convert DOS 3.3 wares to run under ProDOS? 038- How can I modify ProDOS to do BLOADs to Text Page 1? 039- How can I boot ProDOS on my Franklin computer? 040- What are some good DOS 3.3 and ProDOS references? From: Rubywand 001- What is a "DOS"? "DOS" means "Disk Operating System". A DOS is a collection of machine language routines and data which lets a computer Read and Write information to/from disk. A DOS also includes commands, such as SAVE and LOAD, which you can use to create and access files on disk. Apple II DOS, Commodore 64 DOS, and the DOS used on PC's are all called "DOS"; but, they are different systems. Their commands are similar, sometimes identical, because what users want to do with disks is about the same whatever the computer. However, the way each DOS arranges and keeps track of data on disk is very different. You will not, for example, be able to read files from a C-64 diskette on your Apple II running under DOS 3.3. -------------------- 002- What DOS's are available on Apple II computers? DOS 3.3 is the first DOS to be widely used on Apple II computers. Many programs were written to use DOS 3.3 commands and saved on DOS 3.3 diskettes. Apple 'officially' replaced DOS 3.3 with ProDOS back in the early '80's. However, DOS 3.3 continues to be popular with II users. Another Apple II DOS is the one introduced with Apple Pascal. Compared to DOS 3.3 or ProDOS, the Apple Pascal DOS is a very limited, cumbersome operating system. ------------------- 003- DOS 3.3 seems kind of slow. Are there any faster better versions of DOS 3.3? Yes. Today, most "DOS 3.3 users" do not actually use DOS 3.3. Long ago, Beagle Bros introduced patches which resulted in much better speed, freed-up extra disk space, and added a CATALOG command which shows number of Free Sectors. Their ProntoDOS or some modification of it is, for practical purposes, the "current version" of DOS 3.3. ES DOS ][ adds a few mods to ProntoDOS. CATALOG shows Free Sectors and Number of Tracks and it scrolls the entire Catalog (scrolling stopped by pressing any key) instead of stopping when the screen is full. ES DOS ][ also lets you use the semi-colon as a terminating 'wildcard' character. Other popular, higher speed versions of DOS 3.3 include David DOS and Diversi-DOS; and, there are several small, special-purpose versions of DOS 3.3. For example, one game maker used RDOS to save space and to make its diskettes harder to copy. ----------------------- 004- What commands are available in DOS 3.3? To get very far with "DOS 3.3" you will need the DOS Manual. This is especially true when it comes to using TEXT files. Other good sources of DOS 3.3 info include _Beneath Apple DOS_ and _Apple II User's Guide_. For now, the following is a quickie guide to most Apple II DOS 3.3 commands: LOAD NARF- loads a BASIC file named NARF. SAVE NARF- saves current BASIC program in memory as file named NARF. DELETE NARF - deletes file named NARF CATALOG - lists contents of diskette to screen RENAME NARF, NEWNARF - renames file NARF to NEWNARF RUN NARF- loads and starts a BASIC file named NARF. BLOAD NARF.PICTURE, A$2000 - loads in a binary file named NARF.PICTURE starting at address $2000. note: $2000 is a hexadecimal number ($2000 = 8192 in decimal). DOS commands can use hex or decimal numbers. BSAVE NARF, A$300, L$7F - saves $7F bytes of memory starting at address $300 as a binary file named NARF. (BSAVE NARF, A768, L127 uses decimal numbers to do the same thing.) note: The above command statement illustrates typical DOS syntax ... BSAVE-- the DOS command NARF-- the file name (the space between the command and file name is not a requirement; BSAVENARF is okay) ,-- a comma to separate file name from parms which follow A-- means an Address follows $300-- the address in hex from which you want to start saving bytes (= 768). Again, spaces do not matter; A768, A 768, A $ 300 are all okay ,-- a comma to separate one parm from another L-- means a Length follows $7F-- the length in hex (= 127); this is the number of bytes to be saved The command statement says Save $7F bytes, starting at address $300, to a file named "NARF". NARF will have the bytes found at addresses $300 through $37E. note: The order of parms following a file name does not matter. BRUN NARF.DISP, A$1000 - loads in a binary file named NARF.DISP starting at address $1000 and starts executing machine instructions at address $1000 LOCK NARF- locks file NARF (indicated by * in a CATALOG). LOCKed files cannot be deleted, over-written, etc. UNLOCK NARF - cancels LOCKed status of NARF. VERIFY NARF - uses checksums to verify that NARF is not a damaged file MON C, I, O - tells DOS to display Commands, Inputs from disk, Outputs to disk. You can specify one, two, or all three (e.g. MON C, O etc.). NOMON C, I, O - cancels all MON requests. NOMON I cancels just the "I" request. MAXFILES 7 - sets the number of file buffers to 7. (Upon booting DOS, the default for the MAXFILES value is 3.) PR#1 - sets the destination for Apple outputs to the device in Slot 1 (usually a printer). PR# 3 sets it to Slot 3, etc.. PR# 0 sets the destination back to the display screen. PR#6 - normally, boots the diskette in Drive 1, Slot 6. IN# 6 - sets the source for Apple inputs to the device in Slot 6. IN# 0 - sets the source for Apple inputs to the keyboard (default). INT - (integer) puts system into Integer BASIC if it is present. FP - (floating point) puts system into standard Applesoft BASIC. OPEN NARFOO - prepares to read or write a TEXT file named NARFOO. READ NARFOO - tells DOS that INPUT and GET statements will obtain characters from a TEXT file named NARFOO. WRITE NARFOO - tells DOS that PRINTed characters will go to a TEXT file named NARFOO. CLOSE NARFOO - used to terminate access to a TEXT file named NARFOO. Just CLOSE terminates access to all OPENed TEXT files. EXEC NARFGO - tells DOS to execute the BASIC and DOS commands found in a TEXT file named NARFGO The above TEXT file commands handle 'normal' sequential TEXT files. DOS can also OPEN, READ, WRITE, ... random access TEXT files. (See DOS manual.) Most DOS commands also let you specify Drive and/or Slot. For example CATALOG, D2 lists the contents of the diskette in Drive 2 to screen. SAVE NARF,S5,D2 saves NARF to Drive 2 in Slot 5. NOTE --> Using Drive or Slot parms in a DOS command sets the default Drive or Slot. So, after CATALOG, D2, a plain LOAD or SAVE will access Drive 2. -------------------- 005- How do I use DOS commands from the keyboard? ... from a program? To use a DOS command from the keyboard, type it in. (A few commands can be issued only from a program.) To use a DOS command in a program enclose it in quotes preceded by PRINT CHR$(4). For example: 100 PRINT CHR$(4) "BLOAD NARF, A$2000" ------------------------- 006- How do I use variables, say for file length, in a DOS command? Use variables in a command this way: 120 PRINT CHR$(4) "BSAVE NARF, A$2000, L"; NB Line 120 says that the Length of NARF is the value of variable NB. NB is used here to represent the number of bytes (in decimal) to be saved. -------------------------- 007- How do I create new DOS 3.3 diskettes? One of the best features of DOS 3.3 is that any bootable DOS diskette can create other bootable diskettes. INIT HELLO - formats one side of the diskette in the currently active drive, adds DOS, and saves the current program as HELLO. The program that's automatically placed on the new diskette is the one in memory when INIT is executed. It is called the "greeting program" or "hello program" because it is the program which will be run when the diskette is booted. Usually, the program is named HELLO; but, you can INIT HOWDY, or any name you like. The hello program can be very simple, such as ... 100 PRINT CHR$(4) "CATALOG" 110 END You are free to load in and change the hello program or even delete it, just like any other. The one restriction is that once a diskette is INITed, the name of the hello program is fixed for that diskette unless you use a utility (like Copy II+) to make a change. This is why it's a good idea to stick with the name HELLO. You will always know what the hello program's name is. Once a diskette is INITed it can be used to store your programs and data files. ----------------------- 008- How much storage space is on a newly INITialized 5.25" diskette? A standard DOS 3.3 diskette has 35 Tracks. Each Track contains 16 256-byte Sectors. This gives 35 x 16 x 256 = 143360 bytes per side. Current versions of DOS 3.3-- e.g. ProntoDOS, etc.-- use Track 0 and Track 1 plus a sector on Track 2 for DOS; and, Track 17 is used for holding the Catalog of files and other disk information. This leaves roughly 130k bytes per side free for your HELLO program and other files. By the way, when it comes to the way it is stored on-disk, DOS 3.3 is not like the PC's MSDOS or Apple's ProDOS. DOS 3.3 is 'hidden' on reserved tracks, mainly Tracks 0 and 1. There is no "DOS 3.3" file which will show up on a CATALOG. ---------------------- 009- On my PC I can FORMAT diskettes with or without adding the operating system. Can I format a DOS 3.3 diskette for just data storage? -- i.e. without adding DOS or a HELLO program? Yes. DOS 3.3 does not have a plain "FORMAT" command; but, you can use utilities such as Copy II+ to easily format a diskette without adding DOS or a HELLO program. A format will create 35 Tracks of 16 256-byte sectors each, verify that each Track is good, and create a 'Contents' and disk info record called the "Volume Table of Contents" or "VTOC". ---------------------- 010- What is the "Volume Table of Contents" or "VTOC"? The VTOC is a Sector which stores such basic information as Number of Tracks, Sectors per Track, DOS version, ..., and the 'map' of used/un-used Sectors. DOS 3.3 writes the VTOC at Track 17, Sector 0. (For more details on VTOC content see Question 019.) ---------------------- 011- Can I assign names to my DOS 3.3 diskettes? DOS 3.3 has no way to name a diskette "NARF", "DISK 100", "DATA DISK ", etc. which DOS will recognize. You can, however, 'name' a diskette by giving it a Volume Number in the range 1-255. Volume Number is set at the time a diskette is initialized. For example ... INIT HELLO, V19 INITs a diskette as Volume 19. If no number is specified, the default Volume Number used by INIT is 254. Several DOS commands can specify a Volume Number in order to decide whether a diskette is the right one for some application. LOAD NARF, D2, V5 ... for example, will not load NARF from Drive 2 unless the diskette's Volume Number is 5. A few early pieces of commercial software used Volume numbering; and, new users often like to Volume number their diskettes. In practice, this turns out to be a bad idea. A diskette with any Volume Number except the default (254) is often difficult to work with via standard utilities. Also, once a diskette is INITed for a certain Volume Number, changing the number is difficult because Volume Number is embedded in each Sector. (i.e. You'll end up having to copy every file to another diskette and, then, re-INITing the source diskette to the new Volume Number.) Besides, there's an easy way to give descriptive names to your DOS 3.3 diskettes which will not interfer with normal access. Just write the name ("GAMES DISK ONE", or whatever) to a Text file named, say, "DISK.ID". DOS 3.3 will not know about the name or show it in a CATALOG. However, your programs will be able to find out the name by just reading DISK.ID. ----------------------------- 012- What does it mean to "Boot" a disk? BOOT comes from the idea of 'pulling yourself up by your bootstraps'. The Apple II disk controller ROM has just enough smarts to load-in DOS's Bootstrap Loader from Track 0, Sector 0 (it comes in at address $800 ...). The Loader loads in a still smarter, bigger routine from several sectors of Track 0. This routine is the one which loads in the rest of DOS, moves it to the proper place in memory, and ends up going to DOS's Cold Start routine. Finally, the hello program is loaded and executed. -------------------------------- 013- What file types does DOS 3.3 have and how is file type information saved in the Catalog? In a DOS 3.3 Catalog sector, the third byte in each file's entry tells the type of the file: Byte Value* File Type 00 Text 01 Integer BASIC 02 AppleSoft BASIC 04 Binary 08 S type 10 R: Relocatable object module 20 new A type 40 new B type *DOS 3.3 sets bit 7 of the byte if the file is locked. (e.g. 84 --> a locked Binary file) Type R files show up in just a few applications. An R file begins with 6 bytes which a "loader" routine can use to tell the Target location of file contents, How many bytes to move, and Source location to move from. Although S, new A, and new B are included, no official application was defined for them and no DOS commands were created to make any special use of these files. --------------------- from David Empson There was an "R" type relocating loader included with the toolkit for use with BASIC programs and relocatable routines being loaded into upper memory. "S" was used by some programs for a generic image file, or something that was not likely to be touchable with normal code. The LISA assembler used the second "B" type for its source files. It had a patched version of DOS that changed the file type list to read "LARSBAIT", so the source files appeared in the catalog as "L" if you booted LISA, or "B" if you booted a normal disk. The "B", "A", "R" and "S" special file types cannot be accessed by BASIC programs (unless you patch DOS) - commands are only provided for dealing with "B", "A", "I" and "T" files. The four special types can only be accessed using direct calls to the File Manager. ___________________________ From: Dave Althoff, Jr. 014- What do the entries in a DOS 3.3 Catalog display mean? A standard DOS 3.3 Catalog display looks something like this: DISK VOLUME 254 *A 002 HELLO B 033 TETRA/SOFT LOGO.BIN T 142 DAVE'S LIST OF DOS COMMANDS I 002 INTEGER BASIC PROGRAM ^^ ^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ || ||| |||||||||||||||||||||||||||||| || ||| |___________________________________Filename || |_______________________________________File length (in Sectors) ||_________________________________________File type |________________________________________* means the file is locked ----------------------------- 015- How long can a DOS 3.3 file name be and what characters can it include? DOS 3.3 filenames may be up to 30 characters long, and must conform to the following restrictions: a. The first character must have an ASCII code value greater than 63. This excludes numerals, SPACE, and most punctuation. The "@" character is allowed as well as letters, and some special chars such as "]", "~", "_", and a few others. b. Commas and colons may not be used at all. Apart from these restrictions, anything goes. All kinds of characters, including uppercase, lowercase, numbers, symbols, and CONTROL characters can be used after the first character. ____________________________ From: Andy McFadden 016- How can I use DOS 3.3 to read and write sectors from machine code? DOS 3.3 works like this: JSR $3E3 ;get address of RWTS IOB (low in Y, high in A) (you can either change the stuff that Y/A point to, or set up your own IOB and skip the call to $3E3) JSR $3D9 ;call RWTS (with IOB address in Y/A) The IOB (Input/Output Block) is small but non-trivial. Here's what Beneath Apple DOS says: $00 table type (always $01) $01 slot *16 $02 drive (1 or 2) $03 volume expected ($00 for any) $04 track ($0-$22) $05 sector ($0-$0f) $06-07 address (lo/hi) of the Device Characteristics Table $08-09 address (lo/hi) of the 256 byte buffer for read/write $0A not used $0B byte count for partial sector ($00 for 256 bytes) $0C command code (0=seek, 1=read, 2=write, 4=format) $0D return code (carry set on error): $00 = no errors $08 = error during initialization $10 = write protect error $20 = volume mismatch error $40 = drive error $80 = read error (obsolete) $0E volume number of last access (must be initialized) $0F slot number of last access *16 (must be initialized) $10 drive number of last access (must be initialized) Device characteristics table: $00 device type (should be $00 for DiskII) $01 phases per track (should be $01 for DiskII) $02-03 motor on time count (should be $EFD8 for DiskII) NOTE: RWTS uses zero-page location $48, which is also used by the Apple monitor to hold the P-register value. Location $48 should be set to zero after each call to RWTS. ________________ From: Edhel Iaur, Esq. 017- How many 'official' versions of DOS 3.3 are there and how can I tell which is running? According to The Dostalk Scrapbook, there are 3 official (as in Apple made 'em, I think) versions of DOS 3.3. PEEK (46725) supposedly tells you which is running: 165: oldest 186: better 182: latest I remember one had something to do with the way text files are handled. --------------------- From: Dave Althoff The third version then would be the ][e release which contains yet another APPEND patch, and an additional bit of code which shuts off the 80-column firmware during boot. That version comes on a new System Master which uses the LOADER.OBJ0 program to fast-load INTBASIC (or FPBASIC), and a revised "HELLO" program which displays the "MAKE SURE CAPS LOCK IS DOWN" reminder on a ][e. _____________________ From: David Empson 018- How can I find out the address and size of a BLOADed DOS 3.3 file? After you BLOAD a file, you can use the following command to find out the exact length of the file you just BLOADed: PRINT PEEK(43616) + 256 * PEEK(43617) Use another PEEK to find out where it was loaded: PRINT PEEK(43634) + 256 * PEEK(43635) The value displayed is the load address of the binary file. _____________________ From: Neil Parker 019- What information is included in the DOS 3.3 VTOC and catalog sectors? VTOC On track 17 ($11 in hexadecimal) sector 0, you will find the Volume Table of Contents (VTOC). This is the key sector from which all searches start out. Format of VTOC: Byte Meaning ---- ------- $00 Unused (always $04 on my disks) $01 Track number of first catalog sector $02 Sector number of first catalog sector $03 DOS version number ($03 for DOS 3.3) $04-05 Unused $06 Volume number ($01-$FE) $07-26 Unused $27 Number of track/sector pairs in a track/sector list (always $7A on normal disks) $28-2F Unused $30 Last track where sectors were allocated $31 Direction of allocation ($01=inward, $FF=outward) $32-33 Unused $34 Number of tracks per disk (normally $23) $35 Number of sectors per track (normally $10) $36-37 Number of bytes per sector (normally $0100) $38-3B Bit map for track 0 $3C-3F Bit map for track 1 .... $C0-C3 Bit map for track $22 $C4-FF Unused on normal disks (may contain extra bit maps on disks with more than 35 tracks) Bit map format: Byte 0 Byte 1 Byte 2 Byte 3 FEDC BA98 7654 3210 ........ ........ A 1-bit in any bit position indicates that the corresponding sector is free. Bytes 2 and 3 in the bit map are always $00 on normal disks. Bytes 1 and 2 in the VTOC point to the first catalog sector. On most disks, the first catalog sector is track $11 sector $0F, and subsequent catalog sectors occupy track $11 sector $0E, track $11 sector $0D, and so on down to track $11 sector $01. However, DOS 3.3 doesn't really care where the catalog sectors are or how many there are, as long as there is a pointer to the first one in the VTOC. (Note, however, that some utilities, such as Copy II Plus, DO care, and will get lost if the catalog isn' t in its normal position and exactly 15 sectors long.) Catalog Starting at track 17 ($11 in hexadecimal) sector 15, ($0F) and working downward, each catalog sector contains a pointer to the next catalog sector, and seven file entries. The format of a catalog sector is as follows: Byte Meaning ---- ------- $00 Unused $01 Track number of next catalog sector ($00 if no more) $02 Sector number of next catalog sector ($00 if no more) $03-0A Unused $0B-2D First file entry $2E-50 Second file entry $51-73 Third file entry $74-96 Fourth file entry $97-B9 Fifth file entry $BA-DC Sixth file entry $DD-FF Seventh file entry Each file entry looks like this: Byte Meaning ---- ------- $00 Track number of this file's first track/sector list $01 Sector number of this file's first track/sector list $02 File type: Bit Meaning --- ------- 7 0=unlocked, 1=locked 6-0 File type ($00=Text, $01=Integer, $02=Applesoft, $04=Binary, $08=S, $10=Relocatable, $20=A, $40=B) $03-20 File name (high bits set; padded with blanks on right) $21-22 Number of sectors allocated to this file ---------------------------- 020- How does DOS 3.3 remember which sectors are used to store a file? Every file has a set of one or more "track/sector lists". A track/sector list lists sectors (by track and sector number) which make up the file. Each track/sector list points to up to 122 data sectors; if the file is too long for one track/sector list, a second one is allocated, and a pointer to it is stored in the first one. Likewise, if the file is too long for two track/sector lists, a third is allocated, and so on. Note that DOS 3.3 supports "sparse" files...there may 0/0 pairs in the track/sector list indicating parts of the file that were never written. When DOS 3.3 is reading a file and encounters a 0/0 pair in the track/sector list, it passes a buffer full of binary zeros back to the calling program. A track/sector list looks like this: Byte Meaning ---- ------- $00 Unused $01 Track number of next track/sector list sect ($00 if no more) $02 Sector number of next track/sector list sect ($00 if no more) $03-04 Unused $05-06 Sector number in file of first sector number represented in this track/sector list sector (0 ($0000) for first T/S sector, 122 ($007A) for second, 244 ($00F4) for third, etc.) $07-0B Unused $0C Track number of 0th (or 122nd, or 244th...) sector $0D Sector number of 0th (or 122nd, or 244th...) sector $0E Track number of 1st (or 123rd, or 245th...) sector $0F Sector number of 1st (or 123rd, or 245th...) sector .... $FE Track number of 121st (or 243rd, or 365th...) sector $FF Sector number of 121st (or 243rd, or 365th...) sector --------------------------- 021- What are the formats of DOS 3.3's main file types? A machine-language program is free to store whatever it wants in any file, but most programs (including DOS 3.3's own command interpreter) expect the data in each type of file to conform to certain formats: A sequential text file consists of lines of ASCII text separated by carriage returns, and ending with a $00 byte. The high bit of each character (except the $00 at the end) is set. A random-access file may be thought of as a set of "mini sequential access files" separated by strings of $00 bytes. Each "mini-file" begins at a file position which is a multiple of the random-access record length. (Note that sequential and random-access text files share the same file type. It is up to individual programs to know whether their data files are sequential or random-access.) Applesoft and Integer BASIC files have the following format: Byte Meaning ---- ------- $00-01 Length of tokenized BASIC program $02-end Tokenized BASIC program Binary files have the following format: Byte Meaning ---- ------- $00-01 Load address $02-03 Length of binary image $04-end Binary image A Relocatable file contains the image of a program, followed by a relocation dictionary containing the information necessary to relocate the program to an arbitrary memory location. The file format is as follows: Byte Meaning ---- ------- $00-01 Original program load address $02-03 File length (program image + relocation dictionary) $04-05 Length of program image alone (not including relocation dictionary) $06-xx Program image $xx-yy Relocation dictionary (The format of the relocation dictionary is a bit too complex to describe here. I can provide details if anybody's interested.) The other three file types (S, A, and B) have never been consistantly defined by anybody. Several programs use these file types (especially type S) to store their private data files, but there doesn't seem to be any agreement on their internal format. For further information I recommend the book "Beneath Apple DOS" by Don Worth and Pieter Lechner. P.S. By the way, all two-byte fields in the above are stored in normal Apple II byte order, low byte first. ______________________________ From: Rubywand 022- How can I run DOS 3.3 programs from 3.5" disks and hard disk? You can run quite a few DOS 3.3 programs from 3.5" disk, a large RAM disk, or hard disk. However, there are numerous DOS 3.3 programs which will not run this way and which could even damage files and directories on the larger media. Problems are especially likely when a program modifies and CALLs machine code routines such as Read/Write Track-Sector (RWTS) and/or makes assumptions about the physical locations on disk of important DOS 3.3 areas such as the Volume Table of Contents, CATALOG track, and DOS itself. Using a special routine to save "High Scores" to a specific Track/Sector is just one of many ways a DOS 3.3 program might create havoc on a hard disk. On the other hand, you have programs which stick to using standard DOS commands from BASIC such as, probably, most of your own DOS 3.3 programs and most 'type-in' software from publications like SoftSide. Programs like these should run fine using one of the techniques for accessing DOS 3.3 software from 3.5" diskette or hard disk. There are two fairly popular approaches to running DOS 3.3 software from 3.5" diskette on an Apple II. One is to copy it to a specially formatted 3.5" diskette which boots a modified "DOS 3.3" such as AmDOS or OzDOS. Typically, you get two "400k disks" on each 3.5" diskette. A very different approach is used by DOS 3.3 Launcher. It offers two options: 1- You can save some DOS 3.3 programs to ProDOS disk (including 3.5" disk or hard disk). These must be single-file programs that do not access the disk once they are loaded into memory. DOS 3.3 Launcher's Copier is used to set launch options. 2- Using the DOS 3.3 Launcher Copier, you can save an entire DOS 3.3 disk as a disk image to a ProDOS 3.5" diskette, hard disk, etc.. According to 'Launcher's docs: >> Any disk that uses a standard RWTS (Read/Write Track/Sector) routine can be copied in this manner. This includes not only DOS 3.3 disks, but also many old games which use a standard RWTS, but are not actually DOS 3.3. They can then be launched by DOS 3.3 Launcher, which "boots" the large file directly from your hard disk. << To run a program from ProDOS-8, you start DOS 3.3 Launcher from a program selector such as ProSel-8 which supports the ProDOS 8 startup protocol-- i.e. it can make applications automatically open a data file. (The DOS 3.3 Launcher docs tell how to setup a ProSel entry for a program.) Running a program from the IIgs System Finder is much easier. >> If you have properly installed DOS 3.3 Launcher, your DOS 3.3 programs should appear with DOS 3.3 icons when viewed through the Finder. To launch them, you simply double click on them, which launches them via ProDOS 8. << Of the two basic approaches (a special 3.5" DOS 3.3 or DOS 3.3 Launcher), DOS 3.3 Launcher seems to be the better way to go: First, it is easy to set up the contents of a DOS 3.3 disk prior to converting it to disk image form-- you can use any of the popular disk management utilities such as Copy II Plus. Moving DOS 3.3 files onto an AmDOS or OzDOS disk with the crude FID-type copiers available is a hassle. Second, DOS 3.3 Launcher turns out to create and use standard 143,360-byte ProDOS order (.po) disk images except that 'Launcher requires the filetype to be User#1. (It may accept User#2-4, too; not sure.) So, you should be able to download any .dsk disk image on your PC, use an emulator to transfer the contents to a .po disk image, and transfer the .po file via NULL modem to your Apple II. Here you just need to adjust the filetype for use under DOS 3.3 Launcher. Or you can convert 5.25" .sdk (shrinked di sk) files to .po disk image form and transfer these via NULL modem. You can find ... AmDOS at ftp://apple2.caltech.edu/pub/apple2/8bit/utils/ OzDOS at ftp://ftp.gno.org/pub/apple2/appledos33/system/ DOS3.3.Launcher at ftp://ftp.uni-kl.de/pub/apple2/gs/utils/files/ ProSel 8 at ftp://tarnover.dyndns.org/Tarnover/Utilities/ or http://www.grin.net/~cturley/USA2WUG/Utilities/ ------------------------- 023- How can I get DOS 3.3 from the net without an Apple II telecom utility? DOS 3.3 Dump is DOS 3.3 in an Apple II Text file. The purpose of the the dump file (dos33.dmp)is to make it possible for users without DOS 3.3 and without any Apple II telecom program to obtain DOS 3.3 from the net. Once you have DOS 3.3, you can obtain ADT and have a way to transfer 5.25" .dsk disk image files from your net computer to your Apple II. (And once you can transfer disk images, you can get a good Apple II telecom utility and have a way to transfer all kinds of files!) You can find DOS 3.3 Dump as dos33dmp.zip along with a companion Text directions file on Ground at ftp://ground.ecn.uiowa.edu/apple2/upl2000/Mar/ . ============================= 024- What is ProDOS? ProDOS ProDOS is the official Apple ][ DOS which came after DOS 3.3. Do not confuse "ProDOS" and "ProntoDOS". ProntoDOS is a slightly modified DOS 3.3 which provides much faster disk I/O than standard DOS 3.3. ProDOS is a whole new disk operating system. ---------------------------- 025- What are ProDOS's major features? ProDOS has lots of nice features-- mainly, you can create sub-directories, diskettes ("volumes") can be named, and ProDOS works well on hard disks. The GS System 6 Finder can handle ProDOS files and launch programs from ProDOS diskettes. ProDOS's BASIC command interpreter shares many commands with DOS 3.3, too; so, it is not difficult for DOS 3.3 users to get started with the newer operating system. ____________________________ From: David Empson 026- Which Apple II's can run which versions of ProDOS? All Apple II's, from the 64k Apple II+ through the IIgs, can run versions of ProDOS up through version 1.9. (A 48K II+ can also run ProDOS 1.0 or 1.0.1, but this isn't very useful as there are few applications that will work in this environment.) Versions 2.x.x require an Apple II equipped with a 65C02, 65C802, or 65C816 such as an Apple IIe-enhanced, //c, IIc+, or IIgs. ____________________________ From: Rubywand 027- How can I create bootable ProDOS diskettes? Creating bootable ProDOS diskettes is a bit more bother because, unlike DOS 3.3, ProDOS is not automatically written to protected sectors on the diskette via an INIT command. (ProDOS does not have an INIT command.) Instead, ProDOS is in a file on the diskette and so is the ProDOS 'connection' to BASIC, called BASIC.SYSTEM. To make new bootable ProDOS diskettes, the easiest approach is to use Disk Muncher or some other whole-disk copier to just copy a bootable ProDOS diskette. You can delete the files you don't want from the copy. Another option is to use Copy II+ (a ProDOS version) to FORMAT a ProDOS diskette. (FORMAT writes blank tracks so that the diskette can be used to hold files.) Then, copy BASIC.SYSTEM and PRODOS to the new diskette. On a IIgs, all of these operations are easily handled via the Finder. Note: If you want to copy ProDOS from GS/OS, copy the file P8 from the SYSTEM/ folder and rename it to "PRODOS" on your diskette. ------------------------ 028- How do I make a ProDOS disk that will start BASIC? If you want ProDOS to boot and start a BASIC program, then both PRODOS and BASIC.SYSTEM must be present. (BASIC.SYSTEM should be the first .SYSTEM file on the diskette.) The "hello" program on a ProDOS diskette is named "STARTUP". This is the program which will be run upon booting the diskette. (If there is no "STARTUP" program, you will end up at the usual BASIC prompt after booting.) A simple STARTUP program you can type in and save to your new ProDOS diskette is ... 10 TEXT: HOME 20 PRINT CHR$(4)"CAT" 30 END After typing in the program, just enter SAVE STARTUP. Next time you boot the diskette, the above program will run and the diskette's CATALOG will be displayed. A good ready-made STARTUP program and program selector for launching ProDOS 8 programs on a IIgs is available on Ground as speedgs.shk. The file unShrinks to the Startup program and a Readme directions file. You can find speedgs.shk in the 1WSW collection at ... ftp://ground.ecn.uiowa.edu/2/apple2/Collections/1WSW/ ________________________ From: David Empson 029- What is the maximum size of a ProDOS volume? When a diskette is formatted for ProDOS it is given a name by the user. A ProDOS diskette is also called a "volume". A ProDOS hard disk will, usually, be partitioned into two or more named volumes. The maximum size of a ProDOS volume is 32767.5 kilobytes (65535 blocks). ________________________ From: Rubywand 030- How do I LOAD, SAVE, etc. files under ProDOS? LOAD (SAVE, RENAME, etc.) work very much as in DOS 3.3.; so, you can use Slot and Drive parms to specify the target volume. However, to get the most from ProDOS you will usually be working with volume names and folders. (or, "directories"). If GAME3.PIC is a binary file in a directory named "PICS" on a volume named "NARF", you could load it into memory starting at address $2000 via BLOAD /NARF/PICS/GAME3.PIC,A$2000 or, in BASIC 100 PRINT CHR$(4)"BLOAD /NARF/PICS/GAME3.PIC,A$2000" So, in ProDOS, you can access a disk (or volume) by name ... RUN /GAMES/CHINA.SEA will find the disk (volume) named "GAMES", then, find, load, and run CHINA.SEA. You can, also, refer to a disk by its location ... CAT,S6,D1 will do a short-form catalog of the main directory of the diskette in DRIVE 1 connected to SLOT 6. ----------------------- 031- What is a "pathname"? Suppose the file BARDS2.PIC is in the folder PICS on the diskette (volume) named "NARF". Then ... /NARF/PICS/BARDS2.PIC is BARDS2.PIC's complete "pathname". /NARF/PICS/ is a "pathname prefix" for all files in the PICS directory on the volume named "NARF". A leading "/" indicates a volume name (/NARF). The "main directory" or "root directory" is the one in which the files PRODOS and BASIC.SYSTEM (along with any other files the user wants there) are usually located on a ProDOS diskette. NARF's main directory pathname prefix is just /NARF/. ----------------------- 032- What is the default volume and folder when ProDOS boots? When ProDOS boots, it will assume that LOADs, SAVEs, etc. refer to the main directory of the volume from which it was booted. For example, if NARF is booted and JOYSTICK.TEST is a program in NARF's main directory, then RUN JOYSTICK.TEST will run the program. There is no need to enter RUN /NARF/JOYSTICK.TEST . ------------------------ 033- How can I set default volume and folder (directory) under ProDOS? The ProDOS PREFIX command lets you set the volume and folder (or directory) . For example, PREFIX /NARF sets the current default directory to the main directory of the disk (or volume) named "NARF". PREFIX /NARF also sets the default drive (that is, defaults for SLOT and DRIVE) to that in which the volume named NARF is located. Usually, the user does not notice or care about this feature since the location of a volume does not, usually, change during a session. However, it _may_ change, as when a user is swapping-in diskettes among two or three drives. If this happens, ProDOS will look for the diskette. To set the default folder without changing volume, you can use the PREFIX command without a leading "/". For example, if the current default volume is /NARF and NARF's main directory is the default directory, then PREFIX PICS sets the current (default) directory to PICS. The default pathname prefix would be /NARF/PICS/. Of course, PREFIX /NARF/PICS is also a legal command. ---------------------- From: David Empson PREFIX / reverts to the default behaviour of using the root directory of the default drive, and the slot/drive options can be used to change disks, as with DOS 3.3. ______________________ From: Rubywand 034- How can I discover the name of the current default volume? A program can discover the name of a disk (or volume) in the current default drive as follows: 100 PRINT CHR$(4)"PREFIX": INPUT"";P$ The volume name will be saved in P$. This command is often employed after booting to discover the volume name. Line 100 also sets the default directory PREFIX to match the name of the disk (or volume) it finds. ______________________ From: David Wilson 035- How do I create a folder? Creating folders (or directories) is the one time you do not need to provide a type parameter (e.g. TDIR) for the CREATE command. Hence CREATE GIFPICS would create a folder named "GIFPICS" in the current default directory. ______________________ From: Neil Parker 036- How do I access ProDOS routines from machine language? There are 26 different functions that can be performed through the ProDOS machine-language interface (MLI), and each one takes its own unique parameter list. That's far more typing that I'm willing to do tonight, but the information below should at least give a taste of what's available. For more information, you might want to check out your local used bookstores for old Apple ProDOS manuals, or for some of the third-party books that used to be available (I don't even have Apple's ProDOS manuals-- I get by just fine with _Beneath_Apple_ProDOS_ by Don Worth and Pieter Lechner, and _Exploring_Apple_GS/OS_and_ProDOS_8_ by Gary B. Little). Machine-language programs call ProDOS by doing a JSR to $BF00. This entry point is called the machine-language interface, or MLI, and it's responsible for carrying out almost all of the functions tha ProDOS can perform. To determine what function to perform, ProDOS examines the byte immediately following the JSR instruction. Immediately after the command byte come two more bytes that point to the command's parameter list. When the call completes, it returns to the code immediately following the parameter list pointer. Thus, a ProDOS call looks like this: MLI EQU $BF00 JSR MLI DB COMMAND_CODE DW PARAM_LIST BCS ERROR The MLI returns with the carry flag set if an error occurred (hence the "BCS ERROR" instruction in this example), and an error code in the accumulator. There are 26 command codes available: $40 ALLOC_INT Set up an interrupt handler $41 DEALLOC_INT Remove an interrupt handler $65 QUIT Exit the current program; run prgm launcher $80 READ_BLOCK Read a block from a device $81 WRITE_BLOCK Write a block to a device $82 GET_TIME Get the time from a clock card (if any) $C0 CREATE Create a new file $C1 DESTROY Delete a file $C2 RENAME Rename a file $C3 SET_FILE_INFO Change a file's charateristics $C4 GET_FILE_INFO Get a file's characteristics $C5 ONLINE Find the name of a disk in a drive $C6 SET_PREFIX Set prefix to be added to partial pathnames $C7 GET_PREFIX Get the current prefix $C8 OPEN Open an existing file for I/O $C9 NEWLINE Set line-terminator character for an open file $CA READ Read data from an open file $CB WRITE Write data to an open file $CC CLOSE Close an open file $CD FLUSH Flush file's block buffer to disk; don't close $CE SET_MARK Set the current file position $CF GET_MARK Get the current file position $D0 SET_EOF Set the length of a file $D1 GET_EOF Get the length of a file $D2 SET_BUF Set the location of an open file's blk buffer $D3 GET_BUF Get the location of an open file's blk buffer Each call expects a different parameter list. Like I said earlier, the list of parameter lists is too long for me to type in tonight. But I can include a couple of examples...here's how to rename a file, for example: JSR $BF00 DB $C2 ; $C2 = RENAME DW REN_PARMS BCS ERROR REN_PARMS DB 2 ; RENAME parm list contains 2 parms DW OLD_NAME ; 1st parm is ptr to old name DW NEW_NAME ; 2ns parm is ptr to new nme OLD_NAME DB 8,"OLD.NAME" ; (name is count byte followed by ASCII chars) NEW_NAME DB 8,"NEW.NAME" And here's how to quit from a program and return to the ProDOS program selector: JSR $BF00 DB $65 ; $65 = QUIT DW QUIT_PARMS BRK ; (QUIT doesn't return) QUIT_PARMS DB 4 ; QUIT parm list contains 4 parms DB 0 ; All 4 parms normally null DW 0 DB 0 DW 0 _______________________ From: Rubywand 037- How can I convert DOS 3.3 wares to run under ProDOS? Quite a few DOS 3.3 programs will run fine under ProDOS with no change at all. Unless you have some reason to believe a DOS 3.3 program will not run under ProDOS, it's worthwhile to just copy it to a ProDOS diskette and give it a try. Since DOS 3.3 programs which do direct writes can, possibly, damage a ProDOS disk (see Question 22), be sure to run any risky-looking tests from a booted ProDOS diskette for which you have a backup. The main barriers to running DOS 3.3 programs under ProDOS are ... 1. Size: DOS 3.3 leaves more space for programs than ProDOS + BASIC.SYSTEM. Some DOS 3.3 programs are too large for ProDOS. To use them you will need to find ways to reduce program size. 2. Areas of memory used: ProDOS reserves parts of memory, such as Text Page 1 ($0400-$07FF), for various pointers. Some DOS 3.3 programs LOAD or BLOAD into one or more of these areas. For example, some games BLOAD a lo-res pic or Text for you to look at while the rest of the game loads. Normally, ProDOS will refuse to do such loads and the result will be a BUFFERS NOT AVAILABLE error message. To run these programs you will need to unmark the reserved areas which get in the way and/or change the location(s) of the program's troublesome LOADs and BLOADs. When ProDOS loads it uses most of the memory in the "language card" areas. Some DOS 3.3 programs also use this memory. If a DOS 3.3 program uses the "language card" it will probably have to be modified in order to run under ProDOS. ProDOS handles buffer allocation differently than DOS. If a DOS 3.3 program lowers HIMEM in order to create space for BLOADing code or data, it may need to be modified to guarantee that the code/area is safe. (See page 237 of Exploring Apple GS/OS and ProDOS 8 or page 7-4 of Beneath Apple ProDOS.) 3. Names: DOS 3.3 file names can be longer and have more kinds of characters than ProDOS names. If a DOS 3.3. program BLOADs, WRITEs, etc. to any files, you will need to be sure that the file names used are compatible with ProDOS. 4. DOS/ProDOS Commands and Syntax: There are, really, very few DOS 3.3 command and syntax differences likely to cause problems under ProDOS. Still, there are some and you will need to check for these and make any indicated mods. 5. Integer BASIC: Int BASIC programs can be transferred to a ProDOS diskette; but, you can not run them directly under ProDOS. If you are willing to move an Int BASIC program to a Text editor, convert the syntax to Applesoft BASIC, and EXEC the resulting Text file, you can obtain an Applesoft BASIC program which you can modify as necessary for ProDOS. 6. It's not DOS 3.3: Very old software, old commercial copy-protected software, and deprotected copies of old software may not be on DOS 3.3 disks. Your first challenge with such software is getting it into a form which will permit transferring files to a ProDOS diskette. When checking and modifying a DOS 3.3 program for ProDOS a good program editor is essential. You will save untold hours of work when you invest in Beagle's tried and true "Program Writer". _________________________ From: Jeff Blakeney 038- How can I modify ProDOS to do BLOADs in the input buffer and Text Page 1 areas? You can use a POKE 48984,192 to modify the bit map. This protects pages $00 and $01, and unprotects pages $02-$07. Note: Because the firmware and I/O cards make use of the "screen hole" bytes in the $0400-$7FF area, BLOADing over these can interfere with some devices. For this reason, it is best to have special DOS wares on a separate ProDOS diskette with a STARTUP program which does the POKE 48984,192. This way you will know that the system has been changed to run the DOS wares and not inadvertently try to run a program like Appleworks, etc.. under the modified ProDOS. ------------------------- From: David Empson A safer method is to BLOAD the file elsewhere, and copy data onto the text screen in a loop, copying 120 bytes and skipping 8 bytes, repeated 8 times. _________________________ From: Supertimer, Rubywand, David Wilson, Steve Jensen 039- How can I boot ProDOS on my Franklin computer? In an old Apple Clinic note, Stephen Craft listed specific locations to change after your Franklin freezes. You could then restart via a 2000G from the monitor. Here is an updated listing showing the locations to change for several versions of ProDOS: v1.1.1 $269E: EA EA v1.4 $282B: EA EA V1.6 $282B: EA EA v1.7 $282B: EA EA v1.8 $2836: EA EA v1.9 $2865: EA EA v2.0.3 $2836: EA EA It turns out that the bytes Stephen was diddling are D0 03 in the sequence 69 0B D0 03 A5 0C 60. The sequence is near the end of a routine that checks for the "APPLE ][" string found in all genuine Apple II ROMs but not in most Apple II clone ROMs. To fix the booting problem, do this: Start Copy II+ and select "Sector Editor" Swap-in the ProDOS diskette READ Track 0, Sector 0 Search for (Hex bytes): 69 0B D0 03 A5 0C 60 When you find the above, change the D0 03 to EA EA and write the changed sector back to diskette. The patch eliminates the checksum test/branch and allows ProDOS to boot on Apple II clones which would normally fail the check. This patch has no effect on ProDOS functioning on regular Apple II's. The above patch is absolutely necessary to get a bootable ProDOS working for many Apple II clones. Jim Sather (inCider, March 1986) recommends a second patch which is optional. It prevents ProDOS from erroneously reporting that a //e-style 64K 80-column card is present when running on a Franklin. Note: This patch should not be applied except by Franklin 1000 and, possibly, some other clone users. On a //e, //c or IIgs it causes ProDOS to not see an 80-column card or some extra memory. The patch is not needed for Franlin 2000 series machines (the ones that emulate a IIe and IIc) or any of the Laser 128 series. You would not want to apply the patch to these units because they have emulated 80 column cards and 128k (expandable to 1MB on Lasers). To do the patch, procede as described for the main patch and also do this ... READ Track 0, Sector 0 Search for (Hex bytes): AE B3 FB E0 38 When you find the above, change it to A2 EA EA E0 38 and write the changed sector back to diskette. _________________________ From: Rubywand 040- What are some good DOS 3.3 and ProDOS references? DOS Books The DOS Manual from Apple Beneath Apple DOS by Worth & Lechner Apple II User's Guide by Poole, Martin, and Cook ProDOS Books ProDOS Technical Reference Manual from Apple (Addison-Wesley) Beneath Apple ProDOS by Worth & Lechner Exploring Apple GS/OS and ProDOS 8 by Little ProDOS Inside and Out by Doms and Weishaar