Path: nexus.uiowa.edu!uunet!cs.utexas.edu!howland.reston.ans.net!agate!library.ucla.edu!news.mic.ucla.edu!ctc.com!news.cs.umb.edu!hsdndev!dartvax.dartmouth.edu!saturn.caps.maine.edu!maine.maine.edu!io10677 Organization: University of Maine System Date: Fri, 24 Dec 1993 18:52:09 EST From: Douglas M. Howell Message-ID: <93358.185209IO10677@MAINE.MAINE.EDU> Newsgroups: comp.sys.apple2 Subject: Re: Speed Demon Dip Switches... References: Lines: 64 This is from the 1-page manual that comes with the card: For owners without a Bank Switch Language Card in thire Apple, the first seven DIP switches control the access speed of the following: switch 1 -- controls -- slot 1 switch 2 -- " -- slot 2 switch 3 -- " -- slot 3 switch 4 -- " -- paddle/joystick port switch 5 -- " -- slot 5 switch 6 -- " -- slot 6 switch 7 -- " -- slot 7 OFF indicates slot/port is accessed at High Speed. ON indicates slot/port is to Slow Down for access. All slots that can be accessed at High Speed and all empty slots should have the corresponding Dip switch set to "OFF" (this is the non-bank switch setting). Special Note about Switch 4: Switch 4 on the SpeedDemon DIP switch no longer controlsthe access speed to slot 4. It now controls how the joystick and paddles are read. If switch 4 is in the "ON" position, the SpeedDemon will slow down to normal Apple speed for 50 milliseconds each time the joystick is accessed. This allows the software to read the joystick or paddles correctly. If switch 4 is in the "OFF" position, the SpeedDemon will not slow down when they are accessed. Access to slot 4 is always at SLOW (normal) Apple speed. Certain programs, such as Appleworks, use the joystick location, even when the joystick is not in use. If dip switch 4 is set to "ON" then these programs will not show any speed for some functions, such as calculations and sorts. Therefor, unless you need youysticks for your applications, switch 4 should be set in the "OFF" position. If you have a Bank Switch Card (extended 80-col card, Ramworks II, Titan Saturn 128k card, excetera..) set switch 8 to the "ON" position. Bank Switch Language Card Location: Dip Switches 1-3 encode the location of your Bank switch language card. Use the following table to find the appropriate setting for your machine: Dip Switch Bank Switch Card Location 1 2 3 Slot # --- --- --- ------ off off off 0 off off on 1 off on off 2 off on on 3 on off off 4 on off on 5 on on off 6 on on on 7 If you have two bank switch cards in your system, one must reside in slot 0. The other must be in the slot selected by DIP switches 1-3 above. Special Note: Because the first three switches are used to encode the location of the Bank Switch Language Card, you can no longer control the speed of all the slots. Specifically you can not control slots 1,3, or 6. These slots woll now always run Fast except for slot 6 which will always run Slow. Special Note: The slot that the SpeedDemon card resides in should be set to the "Off" position Note: The above information is for version 3.03, your milage may vary.