Newsgroups: comp.sys.apple2 Path: blue.weeg.uiowa.edu!news.uiowa.edu!uunet!tadpole.com!news.dell.com!swrinde!elroy.jpl.nasa.gov!decwrl!netcomsv!netcom.com!butch From: butch@netcom.com (Gabe Sanchez) Subject: Re: Help with CV Tech GS-RAM's jumpers Message-ID: Organization: NETCOM On-line Communication Services (408 261-4700 guest) X-Newsreader: TIN [version 1.2 PL1] References: <33vrkn$4vv@nyx10.cs.du.edu> Date: Thu, 1 Sep 1994 15:20:55 GMT Lines: 41 Fan Li TAI (ftai@nyx10.cs.du.edu) wrote: : Hiyas, : I need to know the jumper settings for the CV Tech GS-RAM card. I'd : lost my manual (sigh). The settings I need are for 2 meg on the CV Tech : card, and a 4 meg piggy-backed Sequential card. : Thank you very much in advance. Ok here is what my manual says interms of the jumbers: A B C A B C ______ ____ 2 | o o | o 2 |o o| o |------| ------- 1 | o o | o 1 o |o o| ------ ---- 1Mb on GS boar 2Mb on GS board A B C A B C _____ ____ 2 o |o o| 2 o |o o| -------- |----| 1 |o o| o 1 o |o o| ---- ---- 3 Mb on Gs board 4Mb on GSboard "Note: these settings do not any meonry that may be piggy baced on the board" So thats it, so as long as you are using the one with 2 Mb on the Gs memory board, it does not matter how many ohter megs you have piggy backed (acording to the manual) hope this heps you! -- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Mr.Butch Sysop of The Micro Exchange :: o RamFast Speed :: :: 714-992-4520 2400 - 28.8k Dual Standard :: o 15 Mhz 64 Cache Zip GS :: :: :: o Internet :: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::