Newsgroups: comp.sys.apple2 Path: news.weeg.uiowa.edu!news.uiowa.edu!uunet!noc.near.net!howland.reston.ans.net!math.ohio-state.edu!cs.utexas.edu!sdd.hp.com!crash!pro-sol!tomk From: tomk@pro-sol.cts.com (Tom Kelly) Subject: Re: Power Supplies Organization: ProLine [pro-sol], Rancho San Diego, CA Date: Sun, 13 Jun 93 21:01:36 PDT Message-ID: In-Reply-To: tomk@pro-sol.cts.com (Tom Kelly) References: Lines: 34 The following is the connections for the power supply ON THE MOTHERBOARD for the Apple ][, ][+, ][e. It was derived from the Apple ][ Reference Manual and examining a Apple ][. It is to be used as a reference and should NOT be accepted as GOSPEL untill you have verified it yourself. It is most useful when splicing a "OLD IBM POWER SUPPLY" on the cable of a Apple ][ supply when they go bad. The IBM supply will NOT fit inside the Apple ][ case. I don't have the connection diagram for the IBM connectors. ___ /5 6\ |3 4| |1 2| ----- PIN NAME COLOR 1,2 GROUND BLACK 3 +5V ORANGE 4 +12V YELLOW 5 -12V GREEN 6 -5V BLUE Please feel FREE to correct and provide anything I have left out. It will be for the GOOD of the Apple "world". ProLine: tomk@pro-sol Internet: tomk@pro-sol.cts.com UUCP: crash!pro-sol!tomk