Path: ns-mx!hobbes.physics.uiowa.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!spool.mu.edu!agate!dog.ee.lbl.gov!ucbvax!cxr_rs6000.med.ge.com!marc
From: marc@cxr_rs6000.med.ge.com (Marc Wolfgram)
Newsgroups: comp.sys.apple2
Subject: Re:  Keys which break!
Message-ID: <9205011742.AA09578@cxr_rs6000>
Date: 1 May 92 17:42:27 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 5

On reparing keycaps: take a paperclip and bend a tight hook in one end to pull
the broken part of the cap out of the switch itself... then cut up the papercli
and bend a short u-shaped piece to be used inside the broken part _and_ tha cap
as a "splint"... put the parts to gether, push in the wire, add superglue, and
wait a bit for the glue to dry before putting the fixed keycap back in the switch.