Subject: Re: Pinouts (was Re: Unindentifiable motherboard port (II Plus clone))
From: Rubywand <rubywand@swbell.net>
Date: Wed, Dec 2, 1998 11Ç42 
Message-id: <366589FE.307BD253@swbell.net>

Michael Black writes ...
> 
> I traced out the circuit last night, and this is the pinout I got.  There
> is nothing to guarantee that some other clone board uses the same pinout.
> I did make sure the address lines to the 74LS251 did match the Apple II
> schematic, so the labels have to be correct.
> 
> pin     function
>  1      +5volts         +5volts
>  2      SW1             SW0
>  3      SW2             SW1
>  4      PDL2            PDL0
>  5      PDL3            PDL1
>  6      ground          ground
>  7      No Connection   No Connection
>  8      NC              NC
>  9      NC              NC
> 
> That doesn't quite look right, but that's what I got.

 ....

     It's a nice straight-forward arrangement; but, the sockets do not
seem to match any popular pinout. I guess you are supposed to plug in
official Fugu Elite-5 joysticks.



Rubywand