Newsgroups: comp.sys.apple2 Path: blue.weeg.uiowa.edu!news.uiowa.edu!uunet!comp.vuw.ac.nz!actrix.gen.nz!dempson From: dempson@atlantis.actrix.gen.nz (David Empson) Subject: Re: Request 4 SSC cable diagram Message-ID: Nntp-Posting-Host: atlantis.actrix.gen.nz Sender: news@actrix.gen.nz (News Administrator) Organization: Actrix - New Zealand Internet Service Providers Date: Thu, 24 Nov 1994 14:49:29 GMT References: <59437-785633280@mindlink.bc.ca> Lines: 28 In article <59437-785633280@mindlink.bc.ca>, Allan Crout wrote: > Greetings, > > I would be grateful if some one would post the Super Serial Card cable > wiring: IDC (10pin at the card end) to DB25 (male) connector? The DB-25 is female, not male. From the original SSC manual: IDC-10 DB-25 Function (with block in MODEM position) 1 1 Frame Ground 2 2 Transmit Data 3 3 Receive Data 4 4 Request To Send 5 5 Clear To Send 6 6 Data Set Ready 7 19 Secondary Clear To Send 8 7 Signal Ground 9 20 Data Terminal Ready 10 8 Data Carrier Detect -- David Empson dempson@actrix.gen.nz Snail mail: P.O. Box 27-103, Wellington, New Zealand