Subject: Re: AppleIIc to pc transfer
From: "Gianni Barberi" <gianni@unforgettable.com>
Date: Mon, Nov 23, 1998 4Ç7 
Message-id: <73c69i$iu1$1@menelao.polito.it>

I just did the same thing:
make a cable and use ADT121.zip, this is a wondeful program that upload
itself into the apple.
for the cable read a previous posting from me:

After much debate and suggestions in the newsgroup I finally connected the
two and they're talking fluently via ADT.
The answer is the most obvious: just connect Transmit Data to Receive Data
and viceversa. Join Ground as well is a good thing, but I did transfer ADT
on my Apple with just 1 wire !
I found it in the most empirical way: shuffling the wires till some garbage
came on the screen.
So I discovered as well that Apple used his own numbering on the DIN plug, a
very wise move: probably we all would be using Apple now if they just
followed the standards.

Here are the connections, you can read the pin numbers on all the plugs.

Apple // c DIN        PC DB9        PC DB25

5                           2                  3
4                           3                  2
2                           5                  7

That's All Folks !

ADT is widely available on the net

write me for any problem

Pete Cauchy ha scritto nel messaggio <730khl$h58@news.voyager.net>...
>I own an apple IIc, have a db25 to dim5 cable and a term program.
>What program/how can I upload the programs to the pc?  I would like to
>make copies of all of my programs(approx 200) available so they don't
>self-destruct.  Also could use any suggestions on what emulator would
>work best on a pentium 60 running win95.
>
>darn@voyager.net