From - Tue Apr 29 14:20:56 1997 Path: news2.cais.com!in1.nntp.cais.net!news.visi.net!www.nntp.primenet.com!nntp.primenet.com!news.maxwell.syr.edu!news-peer.sprintlink.net!sprint!news-pull.sprintlink.net!news-dc-10.sprintlink.net!news.sprintlink.net!news1.rcsntx.swbell.net!usenet From: rubywand@swbell.net Newsgroups: comp.sys.apple2 Subject: Re: [Help!] AppleWorks 2.0 on IIGS Date: Tue, 29 Apr 1997 14:41:38 +0000 Organization: Southwestern Bell Internet Services Lines: 39 Message-ID: <336608A2.6D21@swbell.net> References: NNTP-Posting-Host: ppp-207-193-8-92.hstntx.swbell.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.02E (Win16; I) Joseph E. Walsh writes ... > > Hi, > > I'm trying to get AppleWorks 2.0 to work on the IIGS. Here's what I've > tried, and the results of each: > > 1) Boot IIGS as normal (from 100 MB HDD with GS/OS 6.0.1). Put AW2.0 > disk in the 5.25" disk drive. Open disk on desktop. Click on > APLWORKS.SYSTEM. > Result: Loads ProDOS, loads AppleWorks side 1 fine. When it tells > me to, I flip the disk and hit return. Then it asks for the date, and it > reads it correctly from the system clock. I hit enter. It says "loading > appleworks into extended memory" (BTW, it reports available memory > correctly; more than 3 MB free). But it just sits there. It won't even > reboot correctly (hitting Control-Apple-Reset doesn't work). .... > If your Appleworks 2.0 is the typical multi-patched version (e.g. bug fixes, Time Out, etc.) you might try the following ... Do a CATALOG to find the length of your APPLEWORKS.SYS file. BLOAD APPLEWORKS.SYS at $1000 and go to the monitor. Look for A2 02 1D (for example \A2 02 1D\<1000.4FFFP). I found it at around $24F4. Change the 1D to 1B and exit the monitor. BSAVE APPLEWORKS.SYS, TSYS, A$1000, L What the mod does is to change the toolbox call starting at $24F4 (or wherever) from a check for Total Memory to a check for Available Memory. Rubywand