Subject: Re: Switch-A-Slot.What.cards.compatible?
From: louiss@gate.net   (Louis Schulman)
Newsgroups: comp.sys.apple2
Date: 29 Aug 1999 20:51:26 GMT
Organization: Dis
Message-ID: <7qc6ge$2pp6$1@news.gate.net>
References: <19990829155605.00444.00001567@ng-da1.aol.com>
Reply-To: louiss@gate.net (Louis Schulman)
NNTP-Posting-Host: tstpa1-44.gate.net
X-Complaints-To: abuse@gate.net
NNTP-Posting-Date: 29 Aug 1999 20:51:26 GMT
X-Newsreader: IBM NewsReader/2 v1.2



In <19990829155605.00444.00001567@ng-da1.aol.com>, obsbedia2@aol.com 
(Obsbedia2) writes:

>	I picked up a four slot expander box SCRG (Southern California Research Group)
>Switch-A-Slot.  I originally planned to have it set up in slot 2, the slot I
>usually rotate when I need a special card's capabilities.  It's worked a couple
>of times only from that slot and only with a Transwarp card.
>
>	The original owner said that he had it installed in slot 7.  I tried that and
>it works every time, but still only with the Transwarp.  
>
>[]  I remember reading somewhere that Switch-A-Slot was not friendly toward
>drive cards, but what else does it dislike/like? 
>
>[]  Is anyone using it in a slot other than slot 7?
>
>Jay

I have my Switch-A-Slot in slot 1.  I use it to switch between a Workstation,
clock, serial and parallel cards.  It works fine.

The instructions, which I have somewhere, talk about what you can do to make
cards work, and I think talk about what cards have problems.  E-mail me and
I will conduct a search for the instructions.

Louis