The IIgs Error Codes Listing - Extended Discription Version September 19, 1999 Compiled and Edited Copyright © 1999 by Ben Johnston (MacProber) and GS WorldView ------------------------------------------------------------------------------------------------- GS/OS error $0001: Bad system call number GS/OS error $0004: Parameter count out of range GS/OS error $0007: GS/OS is busy GS/OS Error $0010: Device not found GS/OS error $0011: Invalid device number GS/OS error $0020: Invalid request GS/OS error $0021: Bad control or status code GS/OS Error $0022: Bad call parameter GS/OS Error $0023: Character device not open GS/OS Error $0024: Character device already open GS/OS Error $0025: Interrupt table full GS/OS Error $0026: Resources are not available GS/OS Error $0027: I/O Error GS/OS Error $0028: No device connected GS/OS Error $0029: Driver is busy and not available GS/OS Error $002B: Device is write protected GS/OS Error $002C: Invalid byte count GS/OS Error $002D: Invalid block address GS/OS Error $002E: The disk has been switched GS/OS Error $002F: Device off line or no media present GS/OS Error $0040: Invalid pathname syntax GS/OS Error $0042: The AppleShare file server limit of open files has been reached GS/OS Error $0043: Invalid reference number GS/OS Error $0044: Subdirectory does not exist GS/OS Error $0045: Volume not found GS/OS Error $0046: File not found GS/OS Error $0047: Create or rename attempted with a name that already exists GS/OS Error $0048: The volume is full GS/OS Error $0049: The volume directory is full GS/OS Error $004A: Version error (incompatible file type) GS/OS Error $004B: Unsupported or incorrect storage type GS/OS Error $004C: End of file encountered GS/OS Error $004D: Position out of range GS/OS Error $004E: Access not allowed GS/OS Error $004F: Buffer too small GS/OS Error $0050: File is already open GS/OS Error $0051: Directory error GS/OS Error $0052: Unknown volume type GS/OS Error $0053: Parameter out of range GS/OS Error $0054: Out of memory P8 Error $0055: volume control block table full P8 Error $0056: bad buffer address GS/OS Error $0057: Duplicate volume name GS/OS Error $0058: Not a block device GS/OS Error $0059: Invalid file level GS/OS Error $005A: Block number too large GS/OS Error $005B: ChangePath Can't move an item to another disk or move a folder into one of its subfolders GS/OS Error $005C: Not an executable file GS/OS Error $005D: Operating system not supported GS/OS Error $005F: Too many applications on stack GS/OS Error $0060: Data unavailable GS/OS Error $0061: End of directory has been reached GS/OS Error $0062: Invalid FST call class GS/OS Error $0063: File does not contain a required resource GS/OS Error $0064: Invalid FST number GS/OS Error $0065: FST does not handle this type of call GS/OS Error $0066: FST handled call, but result is weird GS/OS Error $0067: A device exists with the same name as the replacement name GS/OS Error $0068: Device list is full GS/OS Error $0069: Supervisor list is full GS/OS Error $006A: Generic FST error GS/OS Error $0070: Can't expand file, resource already exists GS/OS Error $0071: Can't add resource fork to this type of file. Unknown error GS/OS Error $007E: Unknown file server user GS/OS Error $007F: Unknown file server group: Error creating the new directory: Error saving the file: Insufficient access privileges to open that folder. The selected folder Can't be opened: You can't replace a folder with a file. That file already exists. Insufficient memory to perform that operation. Additional memory needed. Initialization failed: Disk write protected. GS/OS Error $0088: Generic network error The disk is write protected. The disk is full. The disk directory is full. The file is copy-protected and can't be copied. Memory is full. There isn't enough memory remaining to complete this operation. Please close some windows and try again. The item is locked and can't be renamed. An I/O error has occurred while using the disk. This disk seems to be damaged. Not a ProDOS disk. No disks are available. Insert the disk: GS/OS can't read this disk). Do you want to initialize it? Eject or Initialize it. Using the installed File System Translators, GS/OS does not recognize this disk. Do you want to initialize it? Eject or Initialize it. Font size must be a number from 1 to 255. The disk could not be formatted. 800K disks can't be formatted as 1440K, and 1440K disks can't be formatted as 800K. Tool Locator Error $0101: The tool was not found Tool Locator Error $0102: The tool function was not found Tool Locator Error $0103: StartStop record is invalid Tool Locator Error $0104: A tool Can't be loaded Tool Locator Error $0110: The requested minimum tool version was not available Tool Locator Error $0111: Specified message not found Tool Locator Error $0112: No message numbers are available Tool Locator Error $0113: The message name is too long Memory Manager error $0201: Unable to allocate Memory Manager error $0202: Illegal operation on an empty handle Memory Manager error $0203: Illegal operation on a handle that is not empty Memory Manager error $0204: Illegal operation on a locked or immovable block Memory Manager error $0205: Attempt to purge an unpurgeable block Memory Manager error $0206: Invalid handle Memory Manager error $0207: Invalid user ID Memory Manager error $0208: Illegal operation for the specified attributes Miscellaneous Tool Set error $0301: Bad input parameter Miscellaneous Tool Set error $0302: No device for the input parameter Miscellaneous Tool Set error $0303: Specified task already in heartbeat queue Miscellaneous Tool Set error $0304: No signature detected in the task header Miscellaneous Tool Set error $0305: Damaged Heartbeat queue detected Miscellaneous Tool Set error $0306: Specified task not in queue Miscellaneous Tool Set error $0307: Unsuccessful firmware task Miscellaneous Tool Set error $0308: Damaged Heartbeat queue detected Miscellaneous Tool Set error $0309: Dispatch attempted to unconnected device Miscellaneous Tool Set error $030B: No ID tag available Miscellaneous Tool Set error $0380: Specified routine not found in queue Miscellaneous Tool Set error $0381: The correct signature value was not found in the header Miscellaneous Tool Set error $0382: Specified event already in queue Quickdraw II error $0401: Quickdraw II already initialized Quickdraw II error $0403: Quickdraw II not initialized Quickdraw II error $0410: Screen memory reserved Quickdraw II error $0411: Invalid rectangle specified Quickdraw II error $0420: Chunkiness not equal Quickdraw II error $0430: Region already open Quickdraw II error $0431: No region is open Quickdraw II error $0432: Region scan overflow Quickdraw II error $0433: Region is full Quickdraw II error $0440: Polygon already open Quickdraw II error $0441: Polygon not open Quickdraw II error $0442: Polygon too big Quickdraw II error $0450: Invalid color table number Quickdraw II error $0451: Invalid color number Quickdraw II error $0452: Invalid scan line number Desk Manager error $0510: Specified Desk Accessory is not available Desk Manager error $0511: Window pointer is not a pointer to a window owned by an NDA Desk Manager error $0520: Selector out of range Event Manager error $0601: The Event Manager has already been started Event Manager error $0602: Can't reset Event Manager Event Manager error $0603: The Event Manager is not active Event Manager error $0604: Event code is greater than 15 Event Manager error $0605: Button number specified is not 0 or 1 Event Manager error $0606: Size of event queue is greater than 3639 Event Manager error $0607: Insufficient memory available for queue Event Manager error $0681: Event queue damaged - fatal system error Event Manager error $0682: Queue handle damaged - fatal system error Sound Tool Set error $0810: No DOC or RAM found Sound Tool Set error $0811: DOC address range error Sound Tool Set error $0812: The Sound Tool Set is not active Sound Tool Set error $0813: Invalid generator number Sound Tool Set error $0814: Synthesizer mode error Sound Tool Set error $0815: Generator already in use Sound Tool Set error $0817: Master IRQ not assigned Sound Tool Set error $0818: Sound Tool Set already started Sound Tool Set error $08FF: Unclaimed sound interrupt error Apple Desktop Bus Tool Set error $0910: Command not completed Apple Desktop Bus Tool Set error $0911: Can't synchronize with system Apple Desktop Bus Tool Set error $0982: ADB busy (command pending) Apple Desktop Bus Tool Set error $0983: Device not present at address Apple Desktop Bus Tool Set error $0984: SRQ list full Integer Math Tool Set error $0B01: Bad input parameter Integer Math Tool Set error $0B02: Illegal character in string Integer Math Tool Set error $0B03: Integer or Longint overflow Integer Math Tool Set error $0B04: String overflow Text Tool Set error $0C01: Illegal device type Text Tool Set error $0C02: Illegal device number Text Tool Set error $0C03: Illegal operation Text Tool Set error $0C04: Undefined hardware error Text Tool Set error $0C05: Lost device (device no longer on-line) Text Tool Set error $0C06: File no longer availabe Text Tool Set error $0C07: Illegal filename Text Tool Set error $0C08: Insufficient space on specified diskette Text Tool Set error $0C09: Specified volume not on line Text Tool Set error $0C0A: Specified file not in the directory given Text Tool Set error $0C0B: Duplicate file Text Tool Set error $0C0C: Attempt to open file that is already open Text Tool Set error $0C0D: Attempt to access a closed file Text Tool Set error $0C0E: Error in reading real or integer number Text Tool Set error $0C0F: Ring buffer overflow (characters arriving faster than the input buffer can accept them) Text Tool Set error $0C10: The specified disk is write protected Text Tool Set error $0C40: Device did not complete a read or write Window Manager error $0E01: First word of parameter list is the wrong size Window Manager error $0E02: Unable to allocate window record Window Manager error $0E03: Some reserved bits were not clear in Window Manager TaskMask field of Window Manager TaskRec record Window Manager error $0E04: Compiled text is larger than 64 K Menu Manager error $0F03: Structure error - bit 10 of itemFlag is not set Control Manager error $1001: Window Manager not initialized Control Manager error $1002: Control Manager not initialized Control Manager error $1003: Control not in window list Control Manager error $1004: No controls in window Control Manager error $1005: No extended controls in window Control Manager error $1006: No extended control is currently the target control Control Manager error $1007: Action valid only for extended controls Control Manager error $1008: Specified control Can't be made the target control Control Manager error $1009: The specified control ID Can't be found Control Manager error $100A: Too few parameters were specified Control Manager error $100B: No control could be made the target control Control Manager error $100C: There is no front window Loader error $1101: Entry not found Loader error $1102: OMF version error Loader error $1103: Pathname error Loader error $1104: The file is not a load file Loader error $1107: File version error Loader error $1108: User ID error Loader error $1109: Segment number out of sequence Loader error $110A: Illegal load record found Loader error $110B: Load segment is foreign QuickDraw II Auxillary error $1210: Picture is empty Quickdraw II Auxillary error $1211: Height or width is negative, the destination rect is not the same size as source rect, or the source or destination rectangle is not within its boundary Quickdraw II Auxillary error $1212: destMode portion of resMode is invalid Quickdraw II Auxillary error $121F: Bad picture opcode Quickdraw II Auxillary error $1221: Bad rectangle Quickdraw II Auxillary error $1222: Bad mode Quickdraw II Auxillary error $1230: No icon is available for the given input Print Manager error $1301: Specified driver is not in the drivers folder of the system folder Print Manager error $1302: Specified port not selected in the Control Panel Print Manager error $1303: No print record specified Print Manager error $1304: Version of LaserPrep file in LaserWriter is not compatible with this version of Print Manager Print Manager error $1305: Version of LaserPrep in drivers folder is not compatible with this version of the Print Manager Print Manager error $1306: Connection can't be established with the LaserWriter Print Manager error $1307: Read-write error on the LaserWriter Print Manager error $1308: Connection with the ImageWriter Can't be established Print Manager error $1309: The specified parameter is invalid Print Manager error $130A: Tool call not supported by current version of the driver Print Manager error $1321: LLDStartUp call already made Print Manager error $1322: Invalid control value specified LineEdit Tool Set error $1401: The LineEdit Tool Set has already been started LineEdit Tool Set error $1402: Can't reset LineEdit LineEdit Tool Set error $1403: The LineEdit Tool set has not been started LineEdit Tool Set error $1404: Desk scrap too big to copy Desk Manager error $150A: Inappropriate item type Desk Manager error $150B: Item creation failed Desk Manager error $150C: No such item Desk Manager error $150D: Frontmost window not a modal dialog window Scrap Manager error $1610: No scrap of this type Standard File Operations Tool Set error $1701: Invalid promptRefDesc value Standard File Operations Tool Set error $1702: Invalid origNameRefDesc value Standard File Operations Tool Set error $1704: Invalid nameRefDesc value in the reply record Standard File Operations Tool Set error $1705: Invalid pathRefDesc value in the reply record Standard File Operations Tool Set error $1706: SFPGetFile, SFPGetFile2, and SFPMultiGet2 are not active Standard File Operations Tool Set error $17FF: Standard File is not active Note Synthesizer error $1901: Note Synthesizer already started up Note Synthesizer error $1902: Sound Tool Set not started up Note Synthesizer error $1921: No generators available to allocate Note Synthesizer error $1922: Invalid generator number Note Synthesizer error $1923: Note Synthesizer not started up Note Synthesizer error $1924: The specified note is already being played Note Synthesizer error $1925: The version of the Sound Tool Set is not compatible with this version of the Note Synthesizer Note Sequencer error $1A00: The note sequencer is already tracking 32 notes; there is no room for a MIDI NoteOn Note Sequencer error $1A01: The current seqItem is not valid in this context Note Sequencer error $1A02: The sequence is nested more than twelve levels deep Note Sequencer error $1A03: The Note Sequencer is already started Note Sequencer error $1A04: Can't find the note for a NoteOff command Note Sequencer error $1A05: The Note Sequencer was not started Note Sequencer error $1A06: The specified instrument number is out of the bounds of the instrument table Note Sequencer error $1A07: The version of the Note Synthesizer is incompatible with the Note Sequencer Font Manager error $1B01: The Font Manager had already been started Font Manager error $1B02: Can't reset the Font Manager Font Manager error $1B03: The Font Manager has not been started Font Manager error $1B04: Family not found Font Manager error $1B05: Font not found Font Manager error $1B06: Font not in memory Font Manager error $1B07: System font can't be purgeable Font Manager error $1B08: Illegal family number Font Manager error $1B09: Illegal font size Font Manager error $1B0A: Illegal name length Font Manager error $1B0B: FixFontMenu never called Font Manager error $1B0C: Scaled size of font exceeds limits Font Manager error $1B0D: Bad parameter to FMStartUp List Manager error $1C02: The list control did not handle the event ACE Tool Set error $1D01: ACE Tool Set already started up ACE Tool Set error $1D02: Requested direct page location invalid ACE Tool Set error $1D03: ACE Tool Set has not been started ACE Tool Set error $1D04: Requested information type not supported ACE Tool Set error $1D05: Specified compression method not supported ACE Tool Set error $1D06: Specified source invalid ACE Tool Set error $1D07: Specified destination invalid ACE Tool Set error $1D08: Specified source and destination areas overlap in memory ACE Tool Set error $1DFF: The requested function has not been implemented Resource Manager error $1E01: Resource fork not empty Resource Manager error $1E02: Resource fork not correctly formatted Resource Manager error $1E03: No converter routine found for resource type Resource Manager error $1E04: No current resource file Resource Manager error $1E05: Specified resource ID is already in use Resource Manager error $1E06: Specified resource not found Resource Manager error $1E07: Specified ID does not match an open file Resource Manager error $1E08: User ID not found (calling program has not issued ResourceStartUp tool call) Resource Manager error $1E09: No more resource IDs available Resource Manager error $1E0A: Index is out of range (no resource found) Resource Manager error $1E0B: System resource file is already open Resource Manager error $1E0C: Resource has been changed and has not been updated Resource Manager error $1E0D: Another converter already logged in for this resource type Resource Manager error $1E0E: Volume full Resource Manager error $1E10: The named resource was not found Resource Manager error $1E11: Bad version in rResName resource Resource Manager error $1E12: Already started with this ID Resource Manager error $1E13: The resource type or ID was not valid MIDI Tool Set error $2000: MIDI Tool Set has not been started MIDI Tool Set error $2001: Incorrect packet length received MIDI Tool Set error $2002: Array was an invalid size MIDI Tool Set error $2003: MIDI data discarded because of buffer overflow MIDI Tool Set error $2004: Required tools inactive or incorrect version MIDI Tool Set error $2005: MIDI output disabled MIDI Tool Set error $2007: No buffer allocated MIDI Tool Set error $2008: Specified device driver invalid MIDI Tool Set error $2009: Unable to set MIDI clock to the specified frequency MIDI Tool Set error $200A: MIDI clock wrapped to zero MIDI Tool Set error $200B: Two processes competing for MIDI input MIDI Tool Set error $200C: No device driver loaded MIDI Tool Set error $2080: MIDI interface not available MIDI Tool Set error $2081: Specified slot not selected in control panel MIDI Tool Set error $2082: MIDI interface already in use MIDI Tool Set error $2083: MIDI interface overrun by input data (interface not serviced quickly enough) MIDI Tool Set error $2084: No connection to MIDI interface MIDI Tool Set error $2085: Error reading MIDI data MIDI Tool Set error $2086: ROM version or machine type incompatible with device driver MIDI Tool Set error $2087: Conflicting interrupt handler installed TextEdit Tool Set error $2201: TextEdit has already been started TextEdit Tool Set error $2202: TextEdit has not been started TextEdit Tool Set error $2203: The parameter does not refer to a valid Record TextEdit Tool Set error $2204: Invalid descriptor value specified TextEdit Tool Set error $2205: Specified flag word is invalid TextEdit Tool Set error $2206: Invalid parameter count value specified TextEdit Tool Set error $2207: Reserved error TextEdit Tool Set error $2208: The output buffer was too small to accept all data TextEdit Tool Set error $2209: Starting line value is greater than the number of lines in the text, or end of file encountered TextEdit Tool Set error $220A: Reserved error TextEdit Tool Set error $220B: A passed parameter was invalid TextEdit Tool Set error $220C: The LETextBox2 format codes were inconsistant TextEdit Tool Set error $220D: The Font Manager was not started MIDI Synth Tool Set error $2301: MIDI Synth already started MIDI Synth Tool Set error $2302: MIDI Synth has not been started MIDI Synth Tool Set error $2303: Can't get direct page memory MIDI Synth Tool Set error $2304: Can't get memory block MIDI Synth Tool Set error $2305: Miscellaneous Tool Set not started MIDI Synth Tool Set error $2306: Sound Tool Set not started MIDI Synth Tool Set error $2307: Ensoniq generator in use MIDI Synth Tool Set error $2308: Illegal port number MIDI Synth Tool Set error $2309: Port is busy MIDI Synth Tool Set error $230A: Parameter range error MIDI Synth Tool Set error $230B: Message queue full MIDI Synth Tool Set error $230C: Rec buffer is full MIDI Synth Tool Set error $230D: MIDI output disabled MIDI Synth Tool Set error $230E: Message error MIDI Synth Tool Set error $230F: MIDI output buffer is full MIDI Synth Tool Set error $2310: Driver not started MIDI Synth Tool Set error $2311: Driver already set MIDI Synth Tool Set error $2380: The requested device is not available MIDI Synth Tool Set error $2381: The requested slot is already in use MIDI Synth Tool Set error $2382: The requested device is already in use MIDI Synth Tool Set error $2383: Device overrun by incoming MIDI data MIDI Synth Tool Set error $2384: No connection to MIDI MIDI Synth Tool Set error $2385: Framing error in received MIDI data MIDI Synth Tool Set error $2386: RIM version is incompatible with device driver MIDI Synth Tool Set error $2387: Conflicting interrupt handler is installed Media Control Tool Set error $2601: Unimplemented for this device Media Control Tool Set error $2602: Invalid speed specified Media Control Tool Set error $2603: Invalid unit type specified Media Control Tool Set error $2604: Timed out during device read Media Control Tool Set error $2605: No driver is currently loaded Media Control Tool Set error $2606: Invalid audio value Media Control Tool Set error $2607: Device returned error (Can't perform the command) Media Control Tool Set error $2608: Unrecognized status from the device Media Control Tool Set error $2609: Invalid selector value specified Media Control Tool Set error $260A: Funny data received (try again) Media Control Tool Set error $260B: Invalid port specified Media Control Tool Set error $260C: Scans only once Media Control Tool Set error $260D: Resource Manager not active Media Control Tool Set error $260E: Invalid port specified Media Control Tool Set error $260F: The tools set was already shut down Media Control Tool Set error $2610: The tool was already started Media Control Tool Set error $2611: An invalid media channel was specified Media Control Tool Set error $2612: An invalid parameter was specified Media Control Tool Set error $2613: An invalid media control tool call was attempted Finder error $4201: Bad input value Finder error $4202: Could not complete request Finder error $4203: User cancelled operation Finder error $4204: Menu was dimmed Finder error $4205: Not now, the Finder has a headache (Finder is busy) Finder error $4206: Can't add Finder's resources to desktop file Finder error $4207: Unknown rBundle version, or rBundle damaged Finder error $42FF: Request not implemeted -------------------------------------------------------------------------------------------------