Subject: Re: Two monitors on IIe
Path: lobby!newstf02.news.aol.com!portc01.blue.aol.com!news.maxwell.syr.edu!ameritech.net!nntp0.chicago.il.ameritech.net.POSTED!not-for-mail
From: "Paul R. Santa-Maria" <paulrsm@ameritech.net>
Newsgroups: comp.sys.apple2
References: <395cf367.6838967@192.9.201.2>
Message-ID: <01bfe309$201dd4e0$a0e08dce@paulrsm>
X-Newsreader: Microsoft Internet News 4.70.1155
Lines: 30
Date: Sat, 01 Jul 2000 03:08:02 GMT
NNTP-Posting-Host: 206.141.224.160
X-Trace: nntp0.chicago.il.ameritech.net 962420882 206.141.224.160 (Fri, 30 Jun 2000 22:08:02 CDT)
NNTP-Posting-Date: Fri, 30 Jun 2000 22:08:02 CDT
Organization: Ameritech.Net www.ameritech.net  Complaints: abuse@ameritech.net



Kelly Petriew <kelly.petriew@sask1.com> wrote:
> I thought I read something about driving two monitors from the same
> IIe.  Putting an extra 80-col card in slot 3... my memory is fuzzy (at
> best).
> 
> Could someone point me in the direction of this information?  If I
> read it here, I've lost/deleted it...

What is your goal?  Do you want to have the same information on both
monitors?  If so, then you can use a splitter cable (Y cable) to drive both
a color and a monochrome monitor, for example, so you can look at whatever
monitor is more appropriate at the time.  I have done this; there was some
signal loss but the results were acceptable to me.

Do you want to see different information on the two monitors?  Sure, plug a
Videx 80-column card (or clone) into any slot EXCEPT slot three.  If you
plug any card into slot three that uses a slot three ROM (as do most cards
except for CPU cards--accelerators, Z80, etc) then it would interfere with
the IIe's 80 column firmware.  Heck, you could plug in several 80-column
cards into slots and hook a different monitor to each.  However, no
standard software supports this; you would have to write custom software to
use this setup.

-- 

Paul R. Santa-Maria
Ann Arbor, Michigan  USA
paulrsm@ameritech.net